SITEWEBTM is a client-server application requiring no software to be installed on the client computer. When combined with the ASCO Communications Interface Modules (Acc 72A, Acc 72E), the ASCO 5500 Series Thin Web Server and the ASCO 5200 Series Power Manager, as shown above, it provides the most comprehensive Intranet and Internet communications system for the monitoring and control of power transfer switches and engine generators located in your emergency or standby power distribution system.

The SITEWEBTM communication system allows multiple client access, from local or remote locations, and provides for the monitoring of up to 64 power transfer switches and eight engine generators. In addition, automatic paging is provided for all alarm signals.
Feature
Thin Web Server with
 Series 5150
Connectivity Module
Quantity of Monitored/Controlled Power Transfer Switches per LAN 32 64
1024+
Number of Monitored/Controlled Gensets 4 8
1024+
Control & Monitoring Capability
Yes
Yes
No
Embedded Web Pages
No
Yes
Yes
Ethernet Network Compatible
Yes
Yes
Yes
Monitor Multiple Protocols & Baud Rates
(ASCO I, ASCO II, Modbus)
No
No
Yes
Monitor Multiple Sites Dial-Up Internet
Intranet
Multiple Client Access No Up to 8
Up to 8
Client Software Required Yes Internet Explorer
Internet Explorer
Monitors Dissimilar ASCO Controllers on Common LAN
No
No
Yes
Communicates with ASCO Remote Annunciators
No
No
Yes
E-mail / Paging Alarms No Yes
No
Historical Trending Option Alarms
No
Yes
No
5500 Series Thin Web Server (for use with SITEWEBTM products)
The ASCO Thin Web Server allows you to monitor and control transfer switches and engine generators anytime over the Internet or an Intranet from anywhere in the world. It also transmits a page message that an alarm has occurred with one or more of the transfer switches. Plus, this is possible from your home computer or anywhere that has Internet service, using the ASCO Thin Web Server single-board computer with its embedded SITEWEBTM HTML web pages.
Communication Interface Modules ( Acc 72A, 72E)

Serial Module 5110 (Acc 72A) is used to allow local or remote communications with ASCO PowerQuest® or SITEWEBTM communication products. The module is used to connect the Series 300 and ASCO Remote Annunciators to the serial network via an RS-485 interface. The module has two port connectors used for ATS and Standalone Power Manager connectivity. The serial connection is accomplished from a 5 pin terminal header/socket block. The module is designed to communicate with up to 32 devices.
Serial Module 72A
Connectivity Module 5150 (Acc 72E) is used to bring several different serial devices that communicate at different baud rates and with different protocols to a common Ethernet media. The module is used to connect Series 300 and ASCO Remote Annunciators to the standard Ethernet TCP/IP network with standard 10Base T (RJ-45) connector. The module has been built in customized JAVATM applets (program applications for an internet browser) for each monitored device that loads automatically to a standard Web Browser.

The module is designed to communicate with up to 8 clients such as Web applications (web pages), PowerQuest®, or third party Modbus® devices simultaneously over and Ethernet connection. Click for more details.
Connectivity Module 72E
© Copyright 2001-2008 ASCO Power Technologies, LP
Florham Park, NJ 07932